Mallory Ignition Lakewood STRUT TOWER BRACE 39000 - Manual

1 LAKEWOOD www.lakewoodindustries.com
LAKEWOOD STRUT TOWER BRACE
INSTALLATION INSTRUCTIONS PART NO. 39000
2010 CAMARO SS MODELS
FORM 97146776 08/10
Thank you for your purchase from Lakewood Industries. For
technical assistance, please call 216-688-8300 Monday thru
Friday 8:30 AM to 5:00 PM EST.
WARNING: DUE TO THE TECHNICAL NATURE OF THIS PRODUCT,
AND SPECIALIZED EQUIPMENT, PROFESSIONAL INSTALLATION IS
RECOMMENDED.
CAUTION: INSTALLATION OF THIS PRODUCT REQUIRES WORKING
UNDER THE VEHICLE. IT IS THE RESPONSIBILITY OF THE INSTALLER TO
ENSURE A SAFE WORKING ENVIRONMENT. THE USE OF AN AUTOMOTIVE
LIFT IS RECOMMENDED. MAKE SURE THAT THE VEHICLE IS SAFELY
SUPPORTED AND ALWAYS USE JACK STANDS. ALWAYS WEAR
SAFETY GLASSES.
LAKEWOOD CHASSIS AND SUSPENSION PRODUCTS ARE ENGINEERED AND MANUFACTURED TO IMPROVE THE PERFORMANCE OF YOUR VEHICLE.
WE ENCOURAGE YOU TO ENJOY USING OUR PRODUCTS SAFELY AT A SANCTIONED RACING FACILITY. PLEASE OBEY ALL TRAFFIC LAWS.
1. Safely raise and secure front of the vehicle. Always use
jack stands.
2. Remove the front wheel/tires. NOTE: Removal of the struts is
NOT required
3. Underhood; remove the nut and plate that secures the strut
in the strut tower.
4. Place the alignment rings around the strut mounting stud,
and position the strut tower brace on the vehicle.
5. Using the strut tower brace as a template, use a center
punch to mark the center for each mount hole for the strut
tower brace.
6. Use a 25/64” bit to drill the 4 mounting holes per strut tower.
7. Remove the alignment rings, and install the spacers over the
strut studs, reposition the strut tower brace on the vehicle,
and reinstall the strut mount plate and nut.
8. Install the mounting bolts, nuts, and washers.
9. Torque all of the 3/8” fasteners to 25 ft-lbs and torque the
factory mount nut
10. Reinstall the wheel and tires and safely lower the vehicle.
Go to: www.prestoliteperformance.com
to see a video installation of this product.
LAKEWOOD IS A TRADEMARK OF PRESTOLITE PERFORMANCE
10601 MEMPHIS AVE #12, CLEVELAND, OH 44144
216.688.8300
FAX 216.688.8306
FORM 97146776
08/10
Made in U.S.A.
Printed in U.S.A.