Mr. Gasket 5102 Tire Valve Kit - Manual

1. Insert tire valve into wheel with valve core
facing outward (refer to illustration).
2. Slide rubber washer, steel washer
and hex nut onto threaded end of tire
valve and tighten hex nut securely.
3. To inflate tire, screw valve stem air
adapter into tire valve and inflate to
proper PSI. Remove valve stem air
adapter, install valve cap and
tighten securely.
Installation Instructions
Flush Mount Tire Valve
Part #5102
VALVE STEM AIR ADAPTER
VALVE CAP
TIRE VALVE
WHEEL RIM RUBBER WASHER
STEEL WASHER
HEX NUT The Mr. Gasket Performance Group
10601 Memphis Ave. #12
Cleveland, OH 44144
www.mrgasket.com Form No. 97140014
1. Insert tire valve into wheel with valve core
facing outward (refer to illustration).
2. Slide rubber washer, steel washer
and hex nut onto threaded end of tire
valve and tighten hex nut securely.
3. To inflate tire, screw valve stem air
adapter into tire valve and inflate to
proper PSI. Remove valve stem air
adapter, install valve cap and
tighten securely.
Installation Instructions
Flush Mount Tire Valve
Part #5102
VALVE STEM AIR ADAPTER
VALVE CAP
TIRE VALVE
WHEEL RIM RUBBER WASHER
STEEL WASHER
HEX NUT The Mr. Gasket Performance Group
10601 Memphis Ave. #12
Cleveland, OH 44144
www.mrgasket.com Form No. 97140014
1. Insert tire valve into wheel with valve core
facing outward (refer to illustration).
2. Slide rubber washer, steel washer
and hex nut onto threaded end of tire
valve and tighten hex nut securely.
3. To inflate tire, screw valve stem air
adapter into tire valve and inflate to
proper PSI. Remove valve stem air
adapter, install valve cap and
tighten securely.
Installation Instructions
Flush Mount Tire Valve
Part #5102
VALVE STEM AIR ADAPTER
VALVE CAP
TIRE VALVE
WHEEL RIM RUBBER WASHER
STEEL WASHER
HEX NUT The Mr. Gasket Performance Group
10601 Memphis Ave. #12
Cleveland, OH 44144
www.mrgasket.com Form No. 97140014
1. Insert tire valve into wheel with valve core
facing outward (refer to illustration).
2. Slide rubber washer, steel washer
and hex nut onto threaded end of tire
valve and tighten hex nut securely.
3. To inflate tire, screw valve stem air
adapter into tire valve and inflate to
proper PSI. Remove valve stem air
adapter, install valve cap and
tighten securely.
Installation Instructions
Flush Mount Tire Valve
Part #5102
VALVE STEM AIR ADAPTER
VALVE CAP
TIRE VALVE
WHEEL RIM RUBBER WASHER
STEEL WASHER
HEX NUT The Mr. Gasket Performance Group
10601 Memphis Ave. #12
Cleveland, OH 44144
www.mrgasket.com Form No. 97140014