Mallory Ignition Mallory HYFIRE HEI MODULE 699 User Manual
Page 2
2
www.mrgasket.com
MALLORY IS A DIVISION OF THE MR. GASKET PERFORMANCE GROUP
10601 MEMPHIS AVE. #12, CLEVELAND, OH 44144
216.688.8300
FAX 216.688.8306
FORM 1561M
10/03
Made in U.S.A.
Printed in U.S.A.
8. Select the rev limit using the 6 top switches.
The minimum rpm (with all switches in the "off"
position) is 5,000 rpm. For higher rpm limits, add
the value of the switches in the "on" position to
the base setting of 5,000. See the examples
below.
Note: If your distributor is showing signs of
bushing wear or if there is backlash in the
distributor/cam gear combination, the rev limit
my start 100 to 300 rpm below the rpm that you
have selected.
9. Reinstall the cap and rotor and set the ignition
timing. You may notice a slight timing change now
that you have installed your HyFire HEI Module.
This is normal. If your change is substantial, you
may have reversed the pick up wires.
5000 RPM
6500 RPM
8700 RPM
All switches in
the “OFF” position
5000 + 0 = 5000 RPM
5000 + 1000 + 400 + 100 = 6500 RPM
5000 + 2000 + 1000 + 400 +
200 + 100 = 8700 RPM