Typical applications, Suggested nozzles for heat shrinkables – Master Appliance Master-Mite ESD Heat Gun User Manual
Page 6
6
Typical Applications
NOTE: Users should independently evaluate the suitability of the product for their application.
Your Master-Mite
®
provides a
flow of heated air for a variety
of applications. Uses are as
limitless as your own ingenuity.
• Bend and form plastics
• Cure epoxies
• Deburring plastics
• Defrost frozen coils
• Dry negatives and parts
• Heat solids and liquids
• Loosen nuts and bolts
• Remove floor tiles and putty
• Repair vinyl
• Shrink tubing and packaging
• Soften materials
Vinyl repair is easy with the
Master-Mite
®
.
Will not blow delicate compo-
nents around the work area.
Suggested Nozzles for Heat Shrinkables
Common or Trade
Approx.
Suggested
Type Tubing
Designation
Shrink Temp. °F***
Heat Nozzle
Polyester
Mylar*
175
Blue
Polyvinyl Chloride
PVC; Vinyl
250
Silver
Irradiated Polyvinyl Chloride
PVC; Vinyl
250
Silver
Irradiated Butyl
—
250
Silver
Irradiated Polyelefin
—
275
Silver
Polyfluorinated Ethylene Propylene
FEP
300
Silver
Polyvinylidene Fluoride
Kynar**
350
Silver
Irradiated Neoprene
—
350
Silver
Irradiated Silicone
—
350
Silver
* Registered trade name of Pennsalt.
** Registered trade name of General Electric.
*** Based on latest available information.
MasterMite ESD™ allows you to safely dry, heat or otherwise work with sensitive electronic
components.