Hyundai H-LCDVD700 - Manual (Page 22)

22
Loading
1. Push ON button to switch on the set.
2. Press EJECT button to remove the disc in the unit.
The disc will pop out as figure 1 shows. If no disc, then nothing happens.
3. Push the disc into disc slot. The disc will be slotted in automatically.
Notes:
· Insert the disc carefully. Failure to set it securely could result in damage.
· Do not use cracked or warped discs. Doing so could lead to damage.
· Push single-sided DVDs or CDs in with the label (printed)side up facing to you.
· For double-side DVDs, check each side carefully, then push the disc in securely.
· For CDs or one-sided DVDs, you do not have to worry about touching the label
(printed) side of the disc with your fingers. Since two-sided DVDs, however,
have signal recorded on both sides, so be careful not to scratch them when
removing them from the player.
4. The player starts loading.
Playing
1. Load the disc
·
One of the following messages appears on the screen: DVD, VCD, CD.
· For some discs, playback starts automatically when the disc is slotted in.
· For the disc which had been programmed and stored in memories, playback starts
automatically in the programmed order.
2. Press the PLAY/ PAUSE button.
Playback starts.