MAX PJRC160 - Manual (Page 11)

11
<Battery pack>
BATTERY CHARGER:
Use only an authorized Battery charger, MAX JC928.
3. TECHNICAL DATA
1 NOISE
The typical A-weighted noise level deter-
mined according to EN60745-2-6:
• Sound pressure level (L
pA
): 91dB (A)
• Sound power level (L
WA
): 80dB (A)
• Uncertainty (K): 3dB (A)
2 VIBRATION
The vibration total value (tri-axial vector
sum) determined according to EN60745-1:
• Vibration emission: (a
h
,
HD
): ≤2.5m/s 2
• Uncertainty (K): 1.5m/s
2
3 RADIATED EMISSION 30-1000 MHZ
Class B
4 Overvoltage category
5 Pollution degree
Pollution degree : degree 4 according to IEC
60664-1 (Both of PJRC160 and JC928(CE)).
4. APPLICATIONS
Cutting of the following materials
• Rebar
• Bolt
• Mesh Wire
5. ABOUT PRODUCTION YEAR
This product bears production number in the
body. The two digits of the number from left
indicates the production year.
PRODUCT NAME MAX lithium ion battery pack
PRODUCT NO. JPL925
BATTERY TYPE Lithium ion battery
NOMINAL VOLTAGE DC25.2 V
NOMINAL CAPACITY 3.0 Ah (3,000 mAh)
CHARGING TIME
(USE WITH JC928(CE)) Quick charging - Approximately 35 minutes (Apprx. 90% of capacity)
Full charging - Approximately 45 minutes at 25°C(77°F) (100% of capacity)
ACCESSORIES Pack cap (For preventing short circuit)
WEIGHT 0.9 kg (2.4lbs.)
CHARGING TEMPERATURE 5°C to 40°C (41°F to 104°F)
OPERATING TEMPERATURE -5°C to 40°C (14°F to 104°F)
OPERATING HUMIDITY 80% RH or less
Wear ear protection
PRODUCT Overvoltage category
PJRC160 CORDLESS
RE-BAR CUTTER Category 1
according to
IEC 60664-1
JC928(CE)
BATTERY CHARGER Category 2
according to
IEC 60664-1
(Example)
0 8 8 2 6 0 3 5 D
Year 2008