MaxPower Corp GE LP33 Series - Manual

Introduction
The LP33 S eries is a robust, high performance UPS system
suitable for broad range of mission critical applications
including small data centers, medical, manufacturing,
industrial, telecom and commercial buildings.
Design and Performance
The LP33 S eries uses double conversion topology with a
true on-line VFI (voltage frequency independent) design.
The hybrid IGBT recti fier provides low input
THD (total harmonic
distortion) and high input power factor. The IGBT inverter
section with transformerless output ensures low output
distortion and fast transient response.
High E
fficiency
The LP33S eries can operate in high e
fficiency Eco Mode with
e fficiencies up to 98% across a broad range of the operating
load range. Eco Mode operation continuously monitors
the output voltage and frequency, and will instantaneously
switch to inverter during voltage or frequency disturbance
to ensure compliance with the
ITI ( CBEMA ) curve.
Redundant Parallel Architecture ™ ( RPA ™ )
R edundant Parallel Architecture ™ ( RPA ™ ) can be used
to parallel up to four (4) LP33 units for redundancy or
capacity. The RPA ™ system eliminates single points of
failure by using redundant controls and integral static
switches eliminating centralized bypass cabinets; and
allows field addition of future modules for load growth.
Service
The LP33 S eries is fully supported by GE ’s Global Services
team, providing world-class, 7x24 emergency service
along with preventive maintenance, training, spare
parts depots and application expertise.
Features and Bene
fits
> 208 V Transformerless design for smaller footprint,
less weight and improved e fficiency
> High E fficiency Eco Mode up to 98% efficiency for
single module con
figuration
> High input power factor (>.98) and low input distortion
(<10%) provided by a hybrid IGBT recti fier, prevents
disturbances to other electrical equipment, eliminating
the need for
filters or oversized feeders
> Compact footprint, front service access, easily trans-
portable, robustly designed systemwith low audible noise,
suitable for both o
ffice and industrial environments
> Utilizes high-frequency PWM (Pulse Width Modulation)
IGBT digital control technique, resulting in extremely
low output distortion and fast transient response
> Redundant Parallel Architecture ™ ( RPA ™ ) increases
system reliability by eliminating single points of failure
> Intelligent Energy Management ( IEM ) while
operating multiple units in RPA ™ , the IEM optimizes
double conversion e
fficiency
> Very wide AC -input voltage and frequency
capability minimizes the need to switch to batteries,
resulting in increased battery life
> Superior Battery Management ( SBM ) enhances
battery life and reduces cost of operation
> Integrated internal manual maintenance bypass
reduces the need for external equipment
GE Digital Energy
Power Quality
LP 33 Series
Uninterruptible
Power Supply (
UPS )
10-100k
VA , UL L isted