Advantech AIMB-258 User Manual
User manual aimb-258
Advertising
Table of contents
Document Outline
- AIMB-258
- Contents
- 1 Product Introduction
- 1.1 Before You Proceed
- 1.2 Motherboard Overview
- 1.3 Motherboard Layout
- 1.4 Specifications
- 1.5 Operating System support list
- 1.6 Board Diagram
- 1.7 Ordering Information
- 1.8 Riser Card
- 1.9 Bracket View
- 1.10 Accessories
- 1.11 Layout Content List
- Table 1.1: Jumper Setting List
- Table 1.2: JSETCOM1: COM1/+5 V/+12 V Selection
- Table 1.3: JSETCOM2: COM2 RS232/422/485 Mode Selection
- Table 1.4: CMOS1: Clear CMOS
- Table 1.5: J1:LCD Power 3.3 V/5.5 V Selection
- Table 1.6: PSON1: ATX, AT Mode Selection
- Table 1.7: JWDT1: Watchdog Timer Output Option
- Table 1.8: JOBS: HW monitor
- 1.12 Central Processing Unit (CPU) for AIMB-258
- 1.13 System Memory
- 1.14 Connectors
- 1.14.1 Rear Panel Connectors
- 1.14.2 CPU Fan Connector (CPUFAN1)
- 1.14.3 System Fan Connector (SYSFAN1, SYSFAN2)
- 1.14.4 Serial Port Connector 3456 (COM3456)
- 1.14.5 Front Headphone Connector (HD1)
- 1.14.6 Front Panel Connector (JFP1/JFP2/JFP3)
- 1.14.7 ATX soft power switch (JFP1 / PWR_SW)
- 1.14.8 Reset (JFP1 / RESET)
- 1.14.9 HDD LED (JFP2 / HDDLED)
- 1.14.10 External speaker (JFP2 / SPEAKER)
- 1.14.11 Power LED and keyboard lock connector (JFP3 / PWR_LED&KEY LOCK)
- 1.14.12 USB 2.0 Connector (USB56, USB78)
- 1.14.13 ATX Power Connector (ATX1)
- 1.14.14 LCD Inverter Connector (VP1)
- 1.14.15 LVDS Connector (LVDS1)
- 1.14.16 Digital I/O Connector (DIO_CN1)
- 1.14.17 Serial ATA Connector 1 & 2 (SATA1, SATA2)
- 1.14.18 PCIe x 16 Slot (PCIE X 16)
- 1.14.19 SPI Flash Connector(SPI_CN1)
- 1.14.20 Memory Connector Channel A/B(DIMM1/2)
- 1.14.21 SPDIF1 out connector(SPDIF1)
- 1.14.22 CF connector
- 2 BIOS Operation
- 3 Chipset Software Install Utility
- 4 VGA Setup
- 5 LAN Configuration
- A Programming the Watchdog Timer
- B Pin Assignments
- B.1 USB Connector (USB56,USB78)
- B.2 VGA Connector (VGA1A)
- B.3 DVI Connector (VGA1B)
- B.4 RS-232 Serial Port (COM1~COM2)
- B.5 RS-232 Serial Port (COM3 ~ COM6)
- B.6 PS/2 Keyboard/ Mouse Connector (KBMS1)
- B.7 CPU Fan Power Connector (CPUFAN1)
- B.8 Power LED & Keyboard Lock Connector (JFP3)
- B.9 HDD LED and External Speaker Connector(JFP2/HDD LED and SPEAKER)
- B.10 ATX Soft Power Switch and Reset Connector (JFP1/ PWR-SW and RESET)
- B.11 Audio Front Panel Connector (FPAUD1)
- B.12 GPIO Pin Header (GPIO1)
- B.13 LVDS Connector (LVDS1)
- B.14 LVDS Power Jumper (J1)
- B.15 LVDS Invert (VP1)
- B.16 System I/O Ports
- B.17 DMA Channel Assignments
- B.18 Interrupt Assignments
- B.19 1st MB Memory Map
- 1 Product Introduction