Meriam MFC5150 HART Communicator Manual User Manual

Page 2

Advertising
background image

Safety Information

Failure to follow all instructions could result in injury. Read, understand and follow all
safety warnings and instructions provided with this product. Also, meet or exceed your
employer’s safety practices.

In no event shall Meriam be liable for any indirect, special, incidental, consequential or punitive damages
or for any lost profits arising out of or relating to any services provided by Meriam or its affiliates. It is not
possible for Meriam to identify all foreseeable uses/misuses, therefore all persons involved in
commissioning, using or maintaining this product must satisfy their self that each intended application is
acceptable.



Safety Warnings

The table below defines the safety symbols, signal words and corresponding safety messages used in the
manual to identify potential hazards and are intended to warn persons about hazards that could result in
personal injury or equipment damage.

This is the Read Instruction Manual symbol. This symbol indicates
that you must read the instruction manual.

This is the Safety Alert symbol. This symbol indicates a WARNING. Warnings alert you to actions that can
cause personal injury or pose a physical threat. Please read these carefully.

This is the Safety Glasses symbol. This symbol indicates that you must wear approved safety glasses during
the task.

This is the Safety Gloves symbol. This symbol indicates that you must wear approved safety gloves during
the task.

Indicates a potentially hazardous situation which, if not avoided, will result in death or serious
injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury.

Indicates information essential for proper product installation, operation or maintenance.

Information in this document is subject to change without notice. Check the Meriam web site
(

www.meriam.com

) for latest manual revision.

HART

®

is a registered trademark of the HART Communication Foundation

www.hartcomm.org

For customer assistance please call your local Meriam representative or Meriam directly.

Meriam Process Technologies

10920 Madison Avenue

Cleveland, Ohio 44102

Telephone: (216) 281-1100

Fax: (216) 281-0228

E-mail:

[email protected]

Web:

www.meriam.com


Advertising