Meriam M1 – Series Digital Manometer - Manual (Page 17)

M1 Series - DM Instruction Manual 9R000034-IR
E.O. 6409 JAN 2008
www.meriam.com
Page 17 of 17
Contact Information
If the M1 cannot be zeroed, spanned, or is damaged, it must be
returned to the factory for servicing. In this case, contact the
Meriam Process Technologies representative in your area or call
the factory at the numbers listed below for a Return Material
Authorization (RMA) number.
Meriam Process Technologies
10920 Madison Ave.
Cleveland, OH 44102
Phone (216) 281-1100 FAX (216) 281-0228
All M1 Series pressure instruments recalibrated at the factory are
returned with certificates of NIST traceability.