Micromod Micro-DCI: 53ML5100 Manual Loader - Manual (Page 34)

53ML5100B Manual Loader
INSTRUCTION MANUAL
Table 4-2. Database Modules
Item Title Purpose See
Table
1 Analog Input Module This module is used to configure the voltage/current input
signals (e.g., 0-5 volts [0-20 mA], 1-5 volts [4-20 mA]) and
how the two input signals are interpreted (linear or square
root representation, with or without smoothing). It is also
used to configure the vertical axis range (zero and span) on
the display.
4-3
2
Analog Output Module
The primary purpose of this module is to select and set the
0 - 20 mA or 4 -20 mA output signals for ANO0 and ANO1.
4-4
3 Display Module This module is used to define the number of displays (six
maximum) and to set the display order presentation of the
operator displays.
4-5
4 System Module This module is used to set the instrument tag name and the
display brightness. 4-10
30