Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller Installation - Manual (Page 88)

LITHIUM BATTERY HANDLING PRECAUTIONS
Part. No.
167B024U01
Manufacturer: Eag
l
e Picher Industries, Inc.
Box 130 Bethel Road
Seneca, MO 64865
Part Number: LTC-7P
Type: Inorganic, Liquid Lithium Thionyl Chloride
Voltage: 3.5
Capacity: 750 mAh
Storage Temp.: 150
o
C (302
o
F)
Operating Temp.: -40 to 125
o
C (-40 to 257
o
F)
Sealing: Hermetic, Non-Venting
WARNING
REPLACE BATTERY WITH EAGLE PICHER P/N LTC-7P ONLY. USE OF
ANOTHER BATTERY MAY PRESENT A RISK OF FIRE OR EXPLOSION.
CAUTION
BATTERY MAY EXPLODE IF MISTREATED. DO NOT RECHARGE,
DISASSEMBLE OR DISPOSE OF IN FIRE.
Replacement
Procedure: The LTC-7P battery is short circuit protected for wave soldering.
Care should be taken to avoid short circuiting the battery during in-
stallation. No special handling procedures are required for re-
moval of used batteries.
Disposal
Procedure: Dispose of used batteries in accordance with Federal, state and lo-
cal code requirements for disposal of hazardous materials.
MODULAR CONTROLLER QUICK START
A-5