Micromod MOD: 30ML Display Script Guide User Manual
Page 12
Advertising
MOD 30ML Display Guide
Display Basics
2 -6
If you wish to download the configuration and view the display, you must configure the
appropriate communication block.
The input ranges for the PID block are the default (0-100). Change these ranges in the
Display (DISP) block:
1. Open the DISP block
2. Select Edit Display Formats
3. Change the Low Limit and High Limit for pvB, pvL, spB and spL to match the new
ranges
4. Select
ENTER
5. Save the strategy
Advertising