Micromod MOD: Extended Modbus (XModbus) OPC Server Users Guide - Manual (Page 30)

Extended Modbus OPC Server
Operation and Reference
4.1.3 Serial Port Configuration
Configure the serial port for the communication: Menu item Edit – Ports displays the
communication port settings as shown below:
Figure 4 .4.
Port Properties
• Select the COMM port from the drop-down menu in the Port field and then enable
it by checking the box next to the Enable field.
• Choose the Baud Rate, Parity, Flow Control, Data bits and Stop bits from this
dialog box. Make sure these entries match the settings of the instrument.
• Click on OK to complete the Port configuration.
• The Extended Modbus Device Properties dialog box will redisplay with the port
number. Leave other fields on this dialog box at their default values.
• Click on OK. The added device will be displayed in the Device Tree on the left
frame as shown in the next figure:
4 - 4