Avaya 1600 Series - Manual (Page 48)

Server Administration
48 Avaya 1600 Series IP Deskphones Administrator Guide
In Table 6 , the 1600 Series IP Telephone sets the system values to the DHCPACK message
field values shown.
The system values L2Q, L2QVLAN, and PHY2VLAN are not set from a name=value pair if
those system values were previously set by LLDP. For more information, see
Link Layer
Discovery Protocol (LLDP) .
Windows NT 4.0 DHCP Server
Verifying the Installation of the DHCP Server
Use the following procedure to verify whether the DHCP server is installed.
1. Select Start-->Settings-->Control Panel.
2. Double-click the Network icon.
3. Verify that Microsoft DHCP Server is listed as one of the Network Services on the
Services tab.
4. If it is listed, continue with the next section. If it is not listed, install the DHCP server.
Table 6: DHCPACK Setting of System Values
System Value Set to
IPADD The yiaddr field.
NETMASK Option #1 (if received).
GIPADD Option #3 (if received, which might be a list of IP
addresses).
TLSSRVR The siaddr field, if that field is non-zero.
HTTPSRVR The siaddr field, if that field is non-zero.
DNSSRVR Option #6 (if received, which might be a list of IP
addresses).
DOMAIN Option #15 (if received).
DHCP lease time Option #51 (if received).
DHCP lease renew time Option #58 (if received).
DHCP lease rebind time Option #59 (if received).