Midlite POWER JUMPER HDTV POWER RELOCATION KIT - Manual

www.midlite.com
Warehouse: 115 Wordell Street, Fall River, MA 02721
Office Mail: PO Box 70189, No. Dartmouth, MA
ph. 508.676.5169 • toll free 800.606.5169 • fax 508.861.0105
All-in-One HDTV Power Relocation Kit
Décor Straps Install From Behind
Fastens with Just 2 Mounting Screws
Easily relocate power to your wall mounted HDTV
and conceal A/V cables within the wall
•
Easy Installation - 1-Piece Design
•
Pre-wired - no electrician required
•
Feed power remotely to your HDTV flat panel and hide cables behind the wall
•
Protect HDTV flat panel with remote surge protection near your A/V gear and equipment
•
Perfect for retro-fit construction projects
•
1.5” Recessed depth
•
Power Rating 15A, 125V
•
UL 817, CSA#22.2#21
SPECIFICATIONS :
• NEMA 5-15R Receptacle connected to a IEC 60320 CY14 power inlet.
• Electrical Rating: 15 Amp, 125 Vac, 60Hz. • Cable Type; NM-B, 14-2 AWG.
CODE AND RATING COMPLIANCY :
• UL 817, CSA#22.2#21 • NEC Code: 250.146(D), Isolated Receptacles. • NEC Article 300.15 (E) Integral Enclosure
and NEC 334.40 (B) Devices of Insulating Material and other NEC code requirements suitable for its intended application.
• Cable Type NM-B usage as defined in Article 334 of the NEC
p/n:
22APJW-7R
1.5”
Recessed
Depth
Also Available Pre-Wired with Metal Clad (22APJW-7R-MC)