Milton Roy Mixing ROBIN RANGE A5 User Manual
Page 2
Range
Agitation calls upon competences in the field of mechanics, hydraulics and chemical engineering. It is the control of these
3 disciplines which allows Milton Roy Mixing to offer a solution of agitation tuned to the customer requirement, according
to his priorities :
- Capital cost
- Cost of operation
- Performance
Agitation Impellers…
The
agitators, can receive, in addition to traditional propellers, patented propellers HPM, Sabre
®
,
anchors, ribbon, self-suction turbine and any propeller designed by the customer.
Because agitation can make your process progress …
The role of agitation in the manufacture of a product can be simple (suspension, homogenisation), it can also be the
heart of your process (reaction, thermal transfer...). Whatever is the degree of importance of agitation, no mediocrity,
no failure is accepted as well on the level of the effectiveness as on reliability. It is frequent that a solution of well
designed agitation can make the productivity progress from 10 to 50% !
This is why, mixers are designed in close cooperation with the user.
A laboratory at your service…
MILTON ROY MIXING Laboratory has several targets :
•
Studies intended to improve propellers efficiency (shape, flowrate...)
•
Studies of basic chemical process placed in particular conditions (crystallization, solid suspension …)
•
To confirm a mixing solution for a new project
•
To assist the customer in his process improvement
To achieve these goals MILTON ROY MIXING has several transparent vessels (up to 5000L) and hydraulic related
softwares.
Ref:
MRM8212201-06/09-Rev02-All rights re
ser
ved for modification without prior notice-non binding informations
www.miltonroy.com
MILTON ROY MIXING
10, rue du bois Gasseau BP N°94
77212 AVON Cedex
FRANCE
Tel : +33 (0) 1.60.74.95.20
Fax : +33 (0) 1.60.74.95.29
www.miltonroymixing.com