Mirion Technologies MPO - Manual (Page 2)

Mirion Technologies (MGPI) Inc
5000 Highlands Parkway
Suite 150
Smyrna Georgia 30082
USA
T +1.770.432.2744
F +1.770.432.9179
Mirion Technologies (MGPI) SA
BP 1
F-13113 Lamanon
France
T +33 (0) 4 90 59 59 59
F +33 (0) 4 90 59 55 18
Mirion Technologies (RADOS) Oy
P.O. Box 506
FIN-20101 Turku
Finland
T +358 2 468 4600
F +358 2 468 4601
Mirion Technolgies (RADOS) GmbH
Ruhrstrasse 49
DE-22761 Hamburg
Germany
T +49 (0) 40 851 93-0
F +49 (0)40 851 93 256
Health Physics
Division
Since norms, specifi cations and designs are subject to occasional change, please ask for confi rmation of the information given in this publication.
MPO
Contamination and Clearance -CheckPoint: Waste TM
www.mirion.com
144754EN-B
Isotope Energy Effi ciency
Ba 133 356 kev 12%
Cs 137 662 kev 14%
Co 60 1170 kev 29%
Detection limits for a 95% confi dence level with Cobalt 60
Background (µrad/h) 50 100 600 1000
Measurement time
(s) for a 120 Bq MDA
52 104 624 1041
Measurement time
(s) for a 370 Bq MDA
4 7 40 65
ELECTRICAL CHARACTERISTICS
Electrical power supply: ●
220 VAC +/-15% or 120 VAC +/- 15% ●
Mains frequency: 50 Hz or 60 Hz ●
Power consumption: 30 VA ●
CE compliant equipment: ●
IEC 1000-4-2/ 1000-4-3/ 1000-4-4/ 1000-4-6 ○
EN 55082-2 / EN 55022 ○
ENVIRONMENTAL CHARACTERISTICS
Operating: ●
Temperature: +10°C to +45°C (50°F to 113°F) ○
Maximum humidity: 95% to 45°C (113°F) ○
Protection index: IP55 ○
Storage: ●
Temperature: -10°C to +70°C (15°F to 155°F) ○
Maximum humidity: < 80% to +25°C (77°F) ○
PHYSICAL CHARACTERISTICS
The measurement chamber is made out of polished stainless steel permit-
ting easy decontamination
MPO: rear view