AllTrade #540025 - Manual (Page 4)

Protect your eyes. The operation of any air compressor can result in foreign objects being thrown into the eyes, which can result in
severe eye damage. Always wear eye protection that meets ANSI Z28.1 specifications during air compressor operation. Eyeglasses are
not always safety glasses.
Be responsible for your hearing. Wear hearing protection during extended periods of operation.
Use the right tool. Use tools properly and for their intended task. Do not force a small tool to do the job of a heavy-duty tool. Using the
right tool to do the right job will do the job intended safer.
Check damaged parts before use of any air tools or attachments, a guard or other part that is damage should be carefully checked to
ensure that it would operate properly and perform its intended function. Check for misalignment or binding of moving parts, breakage
of parts, mounting, or any other conditions that may affect tool operation. A guard or other part that is damage should be properly
replaced. See replacement parts list for additional details.
Avoid unintentional starting. Be sure that your air compressor is in the off position before plugging it into a power cord or electrical
receptacle.
Store all maintenance tools away from the immediate area before turning “on” your air compressor.
Do not overreach. Proper footing and balance is a must at all times while using tools. Unstable support may lead to personal injury. Do
not stand on the tool. Serious injury could result if the tool tips over or you accidentally contact tool.
Never leave the air compressor running unattended. Always turn the power to the “off” position and do not leave the air compressor
until it come to a complete stop.
When using air accessories consult the owner's manual provided by the manufacturer. The use of improper accessories may cause risk
of injury to yourself and others.
Always make sure the tool is in the “off” position and unplugged from the electrical receptacle when making adjustments, changing
parts or performing any maintenance.
Secure work. When possible, the use of clamps or holding device is much safer than holding the work piece with your hands.
Keep protective guards in place and in proper working condition.
Maintain tools and equipment with care. They will function better and safer when kept clean and in good working condition. Keeping the
air compressor clean, dry, and free of grime will add to its life and performance.
Childproof the workshop. The use of master switches and padlocks is highly recommended. Remove starter keys where applicable.
Some dust created by spraying, blowing, power sanding, sawing, grinding, drilling and other construction activities contains chemicals
known to the State of California to cause cancer, birth defects or other reproductive harm.
Reduce your exposure to these chemicals by wearing approved safety equipment such as dust masks that are designed to filter out
microscopic particles.
Use of this product will expose you to chemicals known to the State of California to cause cancer, birth defects, and reproductive harm.
Avoid inhaling vapors and dust. Wash hands after using.
This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects, and reproductive harm.
Wash hands after handling.
4
WARNING
WARNING
WARNING