Mirion Technologies PIS 203S - Manual

Featuring:
radiation monitoring
systems
A Mirion Technologies Division
PIS 203S
Samplers
PIS 203S
Shielded Particulate and Iodine Sampler
The PIS 203S sampler forms part of the RAMSYS
product line. It has been developed to sample air
effl uents under accident conditions conforming to the
requirements set forth by RG 1.97. One sampler for
batch sampling or dual samplers for continuous sam-
pling are available with or without heat tracing. The
sample fl ow rate through the sampler is measured
and totalized. The collected activities of particulates
and iodine are periodically analyzed in a laboratory as
needed.
The PIS 203S is typically used in conjunction with
noble gas monitor and an aeraulic skid that automa-
tically control the operation from standby to active
sampling as applicable.
APPLICATIONS
• Effl uent release monitoring
• Post-accident operations
RELATED MONITORS
• PIS 204L: « light » version
• PIS 205L: « light » version with fl ow rate control
• NGM 203S: low range noble gas monitor
• NGM 204S: high range noble gas monitor
• PING 206S: particulate, iodine and noble gas
monitor
FEATURES
● Available for batch or continuous sampling acquisition
version (single or dual PIS 203S units)
● Automatic start up in accident confi guration
●
Heat tracing available when required
●
Provided with manipulation tools and lead shielded
transport cart
●
Heavily shielded for ALARA radiation considerations
● Available under 10 CFR 50 App.B, ASME NQA-1 and
IEC61226 programs for safety related application