Mobi Technologies 70208 DXR Touch - Manual (Page 23)

21
LIMITED WARRANTY
ADDENDUM: Camera Focus Adjustment Instructions
Mobi Technologies, Inc. warrants this product to be free from defects in material and workman-
ship for a period of ninety (90) days from the date of purchase. Should this product prove to be
defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either
replace or repair it without charge. After the warranty period, a service charge will be applied for
replacement of parts or labor for repair. If you suspect that the product is malfunctioning or is
defective, please call Mobi toll free at 1. 877. 662.4462 and ask for the Service Department. If the
problem still persists after consulting with our Service Department, you may return the product
to obtain warranty service. Please return it to Mobi along with a dated sales receipt from the place
of purchase to verify that it is within the authorized warranty period. This warranty does not cover
damage caused by accident, misuse, abuse, improper maintenance, unauthorized modification,
or connection to an improper power supply. A fee may be charged for repair resulting from such
damage. This warranty excludes all incidental or consequential damages and any liability other
than what is stated above.
PROPER DISPOSAL
If you eventually dispose of the DXR Touch Monitor, Camera, Batteries, or AC Adapters, do so in
accordance with current federal, state and local regulations. As a consumer, you may be obligated
by law to recycle used batteries.
Do not mix products bearing the WEEE symbol (crossed out trash bin icon) with
your general household waste.
For the correct collection and treatment of these products take them to the
collection points designated by your local authority. Alternatively, contact the
supplier that sold you the product.
Occasionally you may need to adjust the camera lens for best focus.
Note: The camera lens will only turn less than 45 degrees in either direction.
Avoid any forceful turns which could damage the camera and possibly
void the warranty.
1) Have the monitor turned on and near the camera you want
to adjust.
2) With the camera on, place and point it to the area it will be
monitoring.
3) While viewing the camera image on the monitor, grip the
silver ring around the camera lens (and the LEDs around it),
and then slowly and gently turn the ring.
4) When the video picture on the monitor is at the sharpest
release the focus ring and leave it set at that position.
Focus
Ring