Mobi Technologies 70294 Secure Start - Manual (Page 12)

10
Brightness Level
To adjust the brightness level on your
Monitor press the Menu Button and use
the “+” and “-” Buttons to select Bright-
ness (Fig. 18).
Press the Menu Button again to select
that option which shows the Brightness
level scale (Fig. 19). Use the “+” and “-”
Buttons to select the desired level and
then the Menu Button again to set the
level.
Link Button
If your Camera and Monitor should lose
their link place both units near each
other and press the LINK Button (Fig. 7,
no. 16) to relink them.
Note: Secure Start™ is a single Camera
system and does not support multiple
cameras.
Other Screen Indicators
Your Monitor will always indicate your
battery level and signal strength on
screen (Fig. 20).
Battery Level
Signal Strength