Morris Tube Bending Capabilities - Manual

ORDER BENDS: By O.D., wall thickness, alloy, degree of bend, centerline radius and tangent.
WALL THICKNESS: 16 ga. (.063), 14 ga. (.083), and 11 ga. (.120) in tubing.
Schedules 5, 10 and 40 pipe. Other wall thicknesses on request.
MATERIALS: Aluminum is 6063-T1 extruded. Stainless is T304 ASTM A312 for pipe and T304 ASTM A249 for tubing.
Carbon steel ASTM A53 for pipe; A513 for tubing. Galvanized A53 for galvanized-coated pipe and A513 for
galvanized-coated tubing. Aluminized tubing is
ASTM A787.
STOCK TUBE BENDS
Morris maintains an extensive inventory of tube
bends available for 24-hour shipment. Most
popular bend sizes are stocked in carbon
steel, aluminum and stainless materials.
M Mo or rr riis s C Co ou up plliin ng g C Co om mp pa an ny y
Tube Bending Capabilities
Pipe and tube bends of up to 180 degrees are readily
available in aluminum, stainless, carbon steel and
galvanized in the sizes listed below. Other centerline
radii are available but not shown. Special shapes,
“U” bends, offsets, and bifurcated bends available
upon request. Morris tube bends are shipped from
our Knoxville, Tennessee plant.
CLR
S
T
ST
O.D.
d = Degrees Bend Angle
For PNEUMATIC SYSTEMS … Short and Long Radius
TUBE PIPE
OUTSIDE DIAMETER
COMMON CENTERLINE STD. TANGENT
SIZE SIZE INCHES MILLIMETERS RADII (CLR) INCHES (ST)
1" 1.0 25.4 3, 4, 6, 12 4"
1" 1.315 33.4 3, 5 4"
1-1/4" 1.25 31.8 3, 7.25 4"
1-1/4" 1.660 42.2 3.5, 4, 6.25 4"
1-1/2" 1.5 38.1 2.5, 6, 7.5, 9, 12, 15, 18, 24, 30, 36 4"
1-3/4" 1.75 44.5 2.5, 8, 9, 12, 15, 24, 30, 36, 48 4"
1-1/2" 1.9 48.3 5, 6, 7.5, 9, 10, 12, 18, 24, 30, 36, 48 4"
2" 2.0 50.8 2.5, 3, 3.5, 4, 5, 6, 8, 8.5, 9, 10, 12, 15, 18, 24, 30, 36, 48 4"
2-1/8" 2.125 54.0 3, 5, 12, 24, 30, 36 4-1/4"
2-1/4" 2.25 57.2 3, 9, 12, 15, 17, 24, 30, 36 4-1/2"
2" 2.375 60.2 6, 7.5, 10, 12, 15, 17, 24, 30, 36, 48 4"
2-1/2" 2.5 63.5 4, 6, 9, 12, 15, 17, 24, 30, 36, 48 5"
2-3/4" 2.75 69.9 2.75, 4, 17, 30, 36, 48 5-1/2"
2-1/2" 2.875 73.0 12, 12.5, 15, 17, 24, 30, 36, 60 5"
3" 3.0 76.2 4, 4.5, 7.5, 9, 10, 12, 15, 18, 24, 30, 36, 48, 60 6"
3-1/4" 3.25 82.6 17, 30, 36 6-1/2"
3-1/2" 3" 3.5 88.9 3.5, 4.5, 6, 8.75, 12, 15, 16, 18, 24, 30, 36, 48 7" (6" - pipe)
3-3/4" 3.75 95.3 17, 24, 32, 36 7-1/2"
4" 3-1/2" 4.0 101.6 4, 5, 6, 7.75, 10, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 8" (7" - pipe)
4-1/4" 4.25 107.9 16, 30, 36, 48, 60 8-1/2"
4-1/2" 4" 4.5 114.3 6, 9, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 9" (8" - pipe)
4-3/4" 4.75 120.7 36 9-1/2"
5" 5.0 127.0 5.5, 7.5, 12.5, 17, 22, 24, 30, 36, 42, 48, 60 10"
5" 5.563 141.3 15, 20, 24, 30, 36, 42, 48, 60, 72 10"
5-1/2" 5.5 139.7 30, 36 11"
6" 6.0 152.4 9, 15, 18, 24, 30, 36, 42, 48, 60, 72 12"
6" 6.625 168.2 18, 24, 30, 36, 42, 48, 60, 72 12"
8" 8.0 203.2 12, 20, 32, 48, 60, 72 16"
8" 8.625 219.1 24, 32, 40, 42, 48, 60, 72 16"
10" 10.75 273.1 40, 48, 50 20"
2240 W. 15th St. • Erie, PA 16505 • 814-459-1741
Phone: 1-800/426-1579 • Fax: 1-800/545-1399
www.morriscoupling.com
e-mail: [email protected]
Call MORRIS COUPLING for all your pneumatic conveying line needs.
N
EW
C
A
PA
B
IL
IT
IE
S!
Capabilities subject to change without notice.