Technical specifications – MIDLAND 200 User Manual

Page 16

Advertising
background image

8

ENGLISH

8

TECHNICAL SPECIFICATIONS

RECEIVER

Frequency coverage .....................................................................................26.960 to 27.405 MHz

Sensivity ..................................................................................better than 1.0 μV for 20 dB SINAD

Adjacent Channel Rejection ..................................................... 60 dB at 10 kHz; 70 dB for 20 KHz

Intermediate Frequency .............................................................1st IF=10.7 MHz; 2nd IF=455 KHz

Audio Output power ................................................................................................... 4.5 watts max

Frequency Response (-6dB) .......................................................................................450-2500 Hz

Squelch ............................................................................................adjustable from 1.2 μV to 1mV

TRASMITTER

Frequency coverage .....................................................................................26.960 to 27.405 MHz

Duty cycle (% on 1 hour) ............................................................... TX 5% - RX 5% - Stand-by 90%

Output Power ................................................................................................................ 4 watts max

Type of modulation ...............................................................................................................AM/FM

Max Deviation ...................................................................................................2 KHz FM; 80% AM

Spurious Radiation ...................................................................................................62 dB or better

Frequency Tolerance .........................................................................................better than 0.002%

Antenna impedance .............................................................................................................50 Ohm

Power supply ..........................................................................................................................13.8V

Current Drain ...................................................................................................FM: 1.3 A; AM: 1.8 A

Dimensions ............................................................................................................125x37x166 mm

Weight ................................................................................................................................0,795 kg

Specifications are subject to change without notice.

A readily accessible disconnect device shall be incorporated in the installation wiring.

The disconnect device shall disconnect both poles simultaneously.

Advertising