MIDLAND BT City UK (Vers. 14.03.2013) - Manual (Page 6)

UK
5
Switching your Midland BTCity
on and off
Switching the unit on:
› Press and hold “Control” button down for approximately 3 seconds
until the BLUE indicator lights.
Switching the unit off:
› Press and hold both “Control” and “VOL-” buttons together for ap-
proximately 3 seconds until the RED indicator flashes 3 times, thus
lessening the chances that you might turn off the unit accidentally
(especially whilst wearing heavy gloves).
Adjusting the volume
Your Midland BTCity uses AGC technology, which automatically
adjusts the listening volume in relation to background noises.
However, it is also possible to manually adjust the volume by means
of the “Volume+” and “Volume -“buttons.
Attention: volume can be adjust only when an audio connection
is active.
Operative “mode”
The BTCity can operate in two main “mode”: Intercom and Phone
The function button on the unit can have different functionality de-
pending on which mode the unit is at that moment.
› In “Intercom mode” the “Control” button lets you manage the
communication.
› In “Phone mode” you can manage your Bluetooth cellular phone
to place/answer a phone call or to listen to the music (in stereo
mode). Please use your phone responsibly and safely.
You can switch (toggle) from one mode to the other simply pressing
the Middle button for 3 seconds. A voice announcement will tell in
which mode you are on.
The toggle sequence is the following:
› Intercom mode (if another unit has been paired)
› Phone mode (if a phone has been paired)
Every time you turn on the unit, the default mode is Intercom (if it
was previously paired to another unit), otherwise it will be Phone (If
was paired to a phone).
If you need to know in which mode the unit currently is, just press the
“Volume + “ and “Volume –“ button together for 3 second. A voice
announcement will tell you the current mode.
Priority
The BTCity manage the different connection/audio sources based on
the following priority rules.
Changing of the operative mode
Every time you change mode (long press of the middle button to tog-
gle between Intercom/ Phone), the previous audio is closed and the
control goes to the new mode.
Intercom
The Intercom has always a higher priority against the music (inclu-
ding Phone/GPS in music play mode). Every time you open the inter-
com the music from a Bluetooth source is stopped. Only the audio/
Music from the “AUX wired connection” is always in background by
default.
Phone calls
The phone call has always the higher priority and will interrupt every
connection, like music, intercom. Only the AUX wired connection can
be still on if the setting “Wired connection always in background” was
enabled.