Aastra Telecom 57i CT IP Phone - Manual (Page 112)

104 Model 57i CT IP Phone User Guide
Using Your 57i CT Cordless Handset
• If all 12 programmable functions have been programmed to "None", the
user is presented with a List empty message when the feature key is
pressed.
• For security reasons, the user has 180 seconds (3 minutes) to complete
the programming. Otherwise, the phone displays the following error:
** Error **: Session expired
, Please reload page.
• For security reasons, the user must submit the page from the same
browser that was used to load the page. If the user tries to submit the
page from any other IP address, the following error displays:
** Error ** Session invalid. Different Client IP Addresses.
— Please
reload page
Programming Feature Keys
You can program up to 15 feature keys on the 57i CT IP phone using the
Aastra Web UI. Use the following procedure to program the feature keys
on your 57i CT Base Station and all paired handsets.
1. Open your web browser and enter the phone’s IP address or host name
into the address field.
2. At the prompt, enter your username and password and click .
Note: For a user, the default user name is “user” and the password field is left blank
3. Click on Operation->Handset Keys..
4. Select the handset key you want to program.
Aastra Web UI
List empty
Use web page to
configure