MIDLAND CT710 - Manual (Page 8)

14 | CT710 Instruction Guide CT710 Instruction Guide | 15
Shortcuts Operation
MenU + 0 ANI setting
MenU + 1 scan mode
MenU + 2 priority scan mode (only in VFO mode)
MenU + 3 VOX Sensitivity setting
MenU + 4 output power setting
MenU + 5 SQ adjust
MenU + 6 scrambler on/off setting
MenU + 7 backlight on/off setting
MenU + 8 backlight color setting
MenU + 9 beep on/off
MenU + # receive and transmit CTCSS/DCS setting
MenU + * S-D +/- potential difference setting
Menu function
Menu Operation
To enter the Menu functions, follow this procedure:
Press
MenU to enter the menu mode.
Turn the encoder to select the menu.
Press
enTer into the menu mode to set the desired function: you can
press the number key directly, but for some functions (such as TOT, Voice,
Frequency offset) you have to rotate the encoder to find the desired op-
tion. Press
enTer to confirm the selected setting.
When you have completed all the setting, press VFO/Mr to exit the Menu
mode.