MIDLAND CT710 - 2014 - Manual (Page 41)

CT710 Instruction Guide | 11
4. Frequency mode.
Press
flank key1 for two seconds to enter or exit the dual-band or single-
band mode.
Dual-band mode
When the dual-waiting mode is selected, the display will show two bands
A or B. When the band A is displayed, it means that frequency A can recei-
ve and transmit, but the other frequencies on the B band can only receive
and cannot transmit. Same thing if the band B is displayed. To switch to A
or B band press briefly
flank key1 .
Single-band mode
Press
flank key1 for two seconds. The display will show:
R 145.025
T 145.025
Now the radio works in single band mode only. To switch from one band
to another, press
flank key1 .
Channel Mode
Press the VFO/MR key to switch to channel mode. Different options can
be displayed:
• Display the current channel number
CH-001
the current channel is the first channel.
• Display the current channel name and channel name
CH-001
current channel name in use
(in this case channel 1).
The name is programmable via software.
001 current channel
• Display the receive / transmit frequency and the current channel
R 145.025
receive frequency
T 145.025
transmit frequency
001 current channel.