Tips and tricks – MIDLAND XTC300 User Manual

Page 7

Advertising
background image

www.midlandusa.com

7

Tips and Tricks

Problem

Solution

Batteries
Camera not turning on

Make sure battery is fully charged .

Recording

Camera not recording

Make sure the switch is pushed all the

way forward . If the record LED does

not come on, turn off the device and

reinstall the battery .

Verify available memory .

Micro SD card

Micro SD card not reading

Ensure the Micro SD card is inserted

properly .

Plug camera into the computer to

verify it has available storage .

Attempt formatting process .

Video Playback

Slow or choppy video

Verify the camera is plugged into a

USB 2 .0 device .

Remove other unused USB devices .

Transfer video to

computer before

viewing .

Verify computer meets minimum

requirements .

Verify proper codec is installed .

Problem

Solution

Video Downloading

Slow data transfer

Verify the camera is plugged into a USB

2 .0 device . If registering as 1 .1, unplug

and the re-plug the device .

Remove other unused USB devices .

Computer does not

recognize camera

Ensure record switch is in the record

position while connected to computer .

Ensure the Micro SD card is inserted

properly .

Micro SD card may be corrupted .

Attempt formatting process .

File won’t transfer off

memory card

Using Windows, run Check Disk

In the run command type:

chkdsk volume:/f

then press enter

Sound

Excessive Wind Noise

Place piece of tape over microphone

hole .

Try using the submersible case

Tips and Tricks

Advertising