MotorVac TRANSTECH III - Manual (Page 3)

[email protected] www.motorvac.com
Introduction
Congratulations on your selection of the TRANSTECH III Transmission Service System. By choosing this
product, you are acquiring the most technologically advanced method available for automatic transmission
service and fluid exchange.
The TRANSTECH III System is a self-contained system; designed to connect to any automatic transmission
through its cooling system lines. Once the unit is connected, it can be used to drain the fluid from the ve-
hicle’s transmission for filter replacement and/or to completely exchange the transmission fluid with new fluid,
without removing the vehicle’s transmission fluid pan.
With the engine idling, the unit will receive the used fluid expelled by the vehicle’s transmission fluid pump
through one of the hoses connected to the transmission cooling system, and supplies new fluid through the
second hose connected to the other side of the disconnected transmission cooling line.
It is recommended that a vehicle’s transmission lubrication system according to the vehicle owner’s manual
to obtain the highest lubricant protection, to reduce friction from internal transmission components, and thus
increase the efficiency and life span of the transmission.
Please study this Operators Manual to become thoroughly familiar with the TRANSTECH III Transmission
Service System.
IMPORTANT
The TRANSTECH III Transmission Service System is designed to work
EXCLUSIVELY with transmission fluid and MotorVac brand chemicals.
Any operational failure through the use of other products (except automatic transmission fluid)
in the TRANSTECH III System voids the manufacturer’s warranty.
See warranty card for details.
1