MotorVac Intake Cleaning System Procedures - Manual (Page 3)

NOTE:
Disconnecting and grounding the secondary ignition
will also keep the engine from starting.
16. Repeat these procedures a maximum of 3 times.
17. After the air intake tract has been cleaned, it will be necessary to start the engine and continue with the
cleaning process.
The continuation of the cleaning service will require the installation of the 6-inch spray tube to clean the Idle Air
Control passage while the engine is running.
NOTE:
If you do not understand these instructions
completely or have any questions contact
MotorVac Technical support at 800-841-8810
BEFORE performing this procedure.