MP Pumps CHEMFLO 5 HYDRAULIC - Manual

CHEMFLO
®
5 HYDRAULIC
2" x 1-1/2" End Suction Centrifugal Pump
Made with high quality investment cast 316 stainless steel components,
the ChemFlo
®
series of pumps are designed to be applied in a wide range
of pumping applications where stainless steel is required.
The ChemFlo
®
5 hydraulic pumps utilize an enclosed impeller designed for
achieving higher heads and efficiencies than a standard semi-open
impeller. Multiple hydraulic flows allow the ChemFlo
®
5 to meet most duty
points up to 300 GPM and total head up to 200 feet. Several mechanical
seal options are available in addition to the standard type 2100 carbon /
ceramic / Viton mechanical seal.
ChemFlo
®
5 hydraulic pumps are offered with 1.16 or 1.59 cubic inch
displacement gear motors for hydraulic flows up to 28 GPM and a
maximum pressure of 1500 PSI.
SPECIFICATIONS:
PSI . . . . . . . . . . . . . . . . Up to 85
Suction and Discharge . . 2" x 1-1/2" ANSI 125# flange
Materials of Construction 316 Stainless steel
Flow . . . . . . . . . . . . . . . Up to 300 GPM
Head Feet . . . . . . . . . . . Up to 200'
Impeller . . . . . . . . . . . . 6.18" enclosed, cast 316 SS
Drive Options . . . . . . . . Hydraulic motor 1.16 cu. in.
Hydraulic motor 1.59 cu. in.
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory)
Standard carbon / ceramic / Viton
Application:
Agricultural •
Commercial •
Industrial •
Marine •
OEM •
Hydraulic Fluid Flow:
Up to 28 GPM •
Hydraulic Motor:
Gear •
Hydraulic System Pressure:
Up to 1500 PSI •
Options:
Hydraulic motors with flow control •