MP Pumps FLOMAX 10 HYDRAULIC - Manual

FLOMAX
®
10 HYDRAULIC
2" x 2" Self Priming Centrifugal Pump
FLOMAX
®
10 Hydraulic self-priming centrifugal pumps are capable of
creating vacuum sufficient to lift liquids from heights up to 25 feet above the
source. Once primed, the pump's built in flapper valve will maintain a full
column of liquid in the suction line.
A FLOMAX
®
10 hydraulic pump is available with a .73 cubic inch
displacement gear motor with hydraulic flows ranging from 8 GPM to 15
GPM and hydraulic pressures ranging from 500 PSI to 1700 PSI.
Standard features include stainless steel drive sleeve, stainless
steel fasteners, renewable wear plate, and a semi-open dynamically
balanced impeller. Options include double grease lubricated
seals, stainless steel impeller and seals for all types of abrasive and/or
corrosive services.
The FLOMAX
®
series of pumps are commonly used in Industrial,
Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire
Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and
Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks,
Bulk Transfer Pumps and much more.
SPECIFICATIONS:
PSI . . . . . . . . . . . . . . . . Up to 85
Suction and Discharge . . 2" x 2" NPT ports
Materials of Construction Bronze
Cast iron
Flow . . . . . . . . . . . . . . . Up to 200 GPM
Head Feet . . . . . . . . . . . Up to 195'
Impeller . . . . . . . . . . . . 6.0" semi-open
Max Solid Size . . . . . . . .625" diameter
Drive Options . . . . . . . . Hydraulic motor .73 cu. in.
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory)
Standard carbon / ceramic / Viton
Application:
Agricultural •
Industrial •
Marine •
OEM •
Features:
Renewable wear plate •
Stainless steel drive sleeve •
Stainless steel fasteners •
Up to a 25' suction lift •
Hydraulic Fluid Flow:
Up to 15 GPM •
Hydraulic Motor:
Gear •
Hydraulic System Pressure:
Up to 1700 psi •
Options:
Hydraulic motors with flow control •