MP Pumps 300 Series - Manual

SERIES 300
3" x 2-1/2" End Suction Centrifugal Pump
SERIES 300 centrifugal pumps are close-coupled to standard NEMA JP
motors. All models are available in cast iron with stainless steel fasteners,
Enclosed impellers are dynamically balanced to improve efficiency and
bearing life.
Standard carbon / ceramic / Viton mechanical seal is self-adjusting and
corrosion resistant to handle almost any liquid.
Completely tested "Wet End" PumPAKs are available without motors. The
MP PumPAK
®
can be mounted to standard NEMA frame motors in just
minutes.
SPECIFICATIONS:
Suction and Discharge . . 3" x 2-1/2" 125 ANSI Flanges
Materials of Construction Cast Iron
Flow . . . . . . . . . . . . . . . Up to 520 GPM
Head Feet . . . . . . . . . . . Up to 190'
Impeller . . . . . . . . . . . . 7" enclosed, cast iron
Max Solid Size . . . . . . . .47"
Motor . . . . . . . . . . . . . . Up to 20HP
Drive Options . . . . . . . . Close coupled 215JP
Close coupled 256JP
Hydraulic motor 1.16 cu. in.
Hydraulic motor 1.58 cu. in.
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory).
Standard - carbon / ceramic / Viton
Application:
Agricultural •
Commercial •
Industrial •
OEM •