MPM MMR-03 - Manual (Page 14)

1
GB
UsinG THe MiXer WiTH THe rOTATiOnAL BOWL MMr-02z
1. Place the bowl onto the stand (11).
2. Fit the main unit along with attached whisks or dough hooks onto the bracket (9).
3. Place the whisks or dough hooks in the container and switch on the appliance by turning the
control knob to the position from „1” to „5” (1).
4. Remove the main unit. Press the bracket button (10).
5. Lift the bracket and press the stand button (11).
6. While mixing using the dough hooks, the flour can be deposited on the bowl's sides. It has to
be scraped with the spatula (13) after switching off the mixer
MiXinG ATTAcHMenT
1. Screw the mixing attachment into the main unit to feel the resistance (8).
2. The container cannot be filled beyond 2/3 capacity to avoid spilling over. The approximate
height is 18 cm, the diameter in the inside - 11 cm.
3. Turn the control knob to the position "mixing attachment" marked with a symbol, to switch
on the appliance press the "turbo" (3) button. Note:Mixing attachment operates only in one
position. Only when the knob has been turned to an appropriate position and by pressing the
,, turbo’’ button.
4. The ingredients must at least cover the mixer's bottom, to make the mixing process
effective.
5. Never connect/remove the mixing attachment to/from the appliance in operation.
6. Never use the mixer for hard ingredients, such as coffee beans, ice cubes, sugar or
chocolate.
7. For safety reasons, the manual mixer detects the presence of accessories in the back outlet.
8. After you have finished using the appliance, you can make use of the power cord clip.
sAFeTy PrecAUTiOns
1. After 5 minutes of continuous use, put away the appliance for a few minutes to cool down.
2. Do not use the appliance longer than 5 minutes at a time.
3. While using the mixing attachment do not use the appliance longer than 1 minute at a time.
Avoid splashing over the housing while mixing.
4. Before disconnecting the mixing attachment turn the rotation regulator to the position "0"
and unplug the appliance.
cLeAninG AnD MAinTenAnce
1. Unplug the appliance.
2. Clean the housing with a damp cloth.
3. Wash the whisks or dough hooks under running water or in a dishwasher. Rinse and dry.
4. It is recommended to clean the accessories as soon as you have finished using the
appliance. This will allow to remove deposited sediments. It prevents the leftovers from
drying out, which makes cleaning more effective and easier, it also prevents bacteria from
reproducing.