MPM MCZ-17 - Manual (Page 10)

10
GB
BEFORE USE
1.. The kettle should be placed upright of flat, stable and dry surfaces .
2. Prior to the first use, fill the kettle with water, bring to boil. It is recommended that you
fill, boil, and empty the kettle at least 2 times.
3 The kettle will turn off automatically after water boiling. However it may be turned off
by the user at any time by moving the “on/off” switch to the off position, if necessary.
4 After water has been boiled or the kettle has been switched off, wait several seconds
before switching it on again.
5 The empty kettle will be automatically turned off by its overheating protection system.
In such case the kettle should be allowed to cool for 15 minutes before its refilling.
HOW TO USE THE KETTLE
1.. Remove the kettle from its base before filling it with water.
2. Open the kettle’s cover, pour water to a desired level (however, not less than 0,5L and
do not exceed the level of 1.7 - 2L)
3. Pushing the button close the cover accurately
4. Switch the kettle by means of the switch. When the water comes to a boil the kettle will
turn off automatically.
Important not! The kettle may be used with its base delivered in the scope of purchased
model. Do not ever open the kettle lid in course of water boiling. The kettle should be
regularly descaled in accordance with the instructions included below. Always unplug cord
of power base before cleaning and allow the jar to cool down. The interior illumination
function works when the kettle is switched on only
w



2

1


3
4
2
7
1
5
6
8
MCZ-19 Twist
MCZ-23 Tercet