MPM MRK-03 User Manual
Page 16
16
GB
lid
B1
and turn it clockwise until it locks into place. Insert the potatoes into the food container
through the feeder tube, pressing gently with the pusher
B2
. When your food is ready, turn
the speed selector
A3
to position
A6
. When using the blades, first turn the speed selector
to position
A4
, then adjust it to position
A5
if necessary.
NOTE! To push the products use only the type of pushed designed for this type of work. Do not push the products
with your hands or with objects not designed for this purpose as this may lead to damage of the device. Do not
allow the kneaded dough to form a lump as this may lead to damage of the device.
WHIPPING FROTH, LIGHT SAUCES OR STIRRING COCKTAILS FUNCTION
Place the container of the food processor
B
on the processing unit
A
in order to place the handle
to the right side of the device. Lock the container by turning it clockwise until it snaps into the
spanners. Place the add-on device for whipping froth, light sauces or stirring cocktails
E
on the
discs driver
A2
in the container of the food processor
B
. Place the products to be kneaded in the
container. Place the lid
B2
and turn it clockwise until the spanner is locked. Place the pusher
B2
in the lid. If necessary, you can add products thorough the hole in the lid. After finishing operating,
turn the switch
A3
in position
A6
.
CLEANING AND MAINTENANCE
1. Before cleaning set the speed switch in position
A6
and unplug the device.
2. Disassembly the add-on devices and accessories in the reverse order than they were
assembled for various functions. Wash all add-on devices and accessories in water with
detergent (this step should be done immediately after use as it facilitates the cleaning
process) and then dry.
3. Do not immerse the processing unit
A
in water and other liquids.
4. Just wipe them with a wet cloth.
After finishing operating, the accessories may be placed in the compartment
A8
which
is located at the bottom of the processing unit
A
. This will facilitate storage of the food
processor and prevent loosing the accessories.
WHEN THE DEVICE DOES NOT WORK
Make sure the plug is properly inserted into the network socket or whether there is any vol-
tage in the socket.
Check whether the container of the food processor
B
and the lid
B1
are assembled correctly.
If everything is assembled correctly and the device still does not work, you should report to an
authorized service centre to detect and remove any faults.
MRK-03_instrukcja_v02.indd 16
2012-07-27 08:56:57