MPM MMK-02M - Manual (Page 10)

10
GB
1. Housing
2. Cover
3. ON/OFF
4. Cable
5. Rubber anti-slippery legs
6. The place for cable
7. Stainless steel grinding knife
8. Ty system against switching on without lid
How To USe THe UnIT
1.Before the use check whether the unit is unplugged.
2. Put the unit on a stable and dry surface.
3. Holding the casing (1) use the other hand in order to open the cover (2)
twisting it counterclockwise and remove it.
4. Pour a doze of coffee grains (approx. 50g.)
5. Holding the casing (1) use the other hand in order put the cover (2)
and block it twisting it clockwise.
6. Plug the unit.
7. In order to operate the unit push and hold the main switch (3).
8. After the milling has been completed, unplug the unit, remove the cover,
pour out the coffee and clean the interior of the coffee mill.
Note: The engine's performance time should not exceed 30 seconds. Than, the unit must
have at least a one minute pause. The unit is equipped with a protection against accidental
start when the cover is fastened incorrectly. Interior of the mill must be cleaned regularly.
CLeanInG and MaInTenanCe
1. The cover must be washed and dried manually.
2. Use a wet cloth to wipe clean the casing and dry it.
3. Do not use tearing agents to clean the unit since they might scratch it and damage.
TeCHnICaL daTa:
Power: 150W
Power supply: 230V AC, 50Hz
KB MAX = 30 sek.
L = 85 dB
WA