MPM MMW-01 - Manual (Page 15)

1
GB
5. Clean the cutting element with the brush (5) which is an element of the equipment.
6. Remove the cutting element pushing it by a thumb and use the brush to clean its area removing
hair.
7. Locate a fastener of the cutting element in the housing’s gap and push it until it blocks.
NOTE:
The appliance is equipped with ceramic cutting elements which do not require any special
maintenance activities. They do not require lubrication or sharpening.
Environment protection
NOTE! The battery the appliance is equipped with contains substances, which may result in
environment pollution.
Before disposal of the appliance remove the battery.
Do not dispose the appliance. Provide it to a special disposing center in order to have it
utilized. In this way one help to protect the natural environment.
TECHNICAL DATA
The Appliance:
Power supply: 2,2V
Power: 7W
Maximal time of continuous operation KB MAX = 10 min
Maximal noise pollution level L
..........
=56dB
Charger : Input current 230-240V, 50Hz,
Output current 2,2V 1000mA
Appropriate disposal of the product
(Used electric and electronic equipment)
The label put on the product and in texts describing the product indicates that after the
use period the product cannot be disposed together with other waste coming from a
household. To avoid a harmful influence on natural environment and people’s health
caused by an uncontrolled disposal of waste, we ask to separate the product from other
waste and to recycle it in a reasonable way in order to promote reuse of natural resources
as a permanent practice. In order to obtain information regarding the place and safe way
of recycling, household users should contact an outlet in which they bought the product
or with local authorities. Users in companies should contact their supplier and check
conditions of purchase agreement. The product cannot be disposed together with other
commercial waste.
Poland
Attention!: MPM Product reserves its rights to modify the technical data.
WA
MMW-01.instrukcja.indd...15 2011-02-04...13:33:20