MPM MSW-06 - Manual (Page 10)

10
GB
unit'S deSCriPtiOn
1. Cold air blow button
2. 3-level temperature control button
3. Air ionization button
4. Cold air blow control lamp (red)
5. Air ionization control lamp (green)
6. Lifting holder
7. Folded handle
8. Focusing attachment
9. Removable air inlet grid
How to use
1. Connect dryer to electric power source, making sure in the first place if the dryer switch
is placed in “0” position.
2. Select the required drying temperature, switching button (2) into 1, 2 or 3 position.
3. Push the (1) button to use the cold air blow function. The cold air blow function is
signaled by turned on red control lamp (4).
4. Switch the (2) button into “0” position when drying is completed.
5. This dryer is provided with air ionization function, started with button (3). When the air
ionization function is switched on, green control lamp (5) will be on.
6. This dryer has the system protecting against overheating – dryer will switch off
automatically when air outlet holes are clogged and it will switch on when dryer will
cool down.
7. It is recommended to switch off the dryer for a while during the long lasting drying.
NotE: This dryer is provided with the focusing attachment (8). The focusing attachment
makes the hair drying easier, directing the focused air blow on the selected part of hairs.
The attachment is assembled by connecting it with the dryer.
uSer MaintenanCe inStruCtiOn
This hair dryer maintenance is free, no consumption or lubrication is needed. Keep this
appliance clean for proper operating. Never block or clog air intakes, otherwise overhe-
ated will be happen. The appliance has no user serviceable parts, any other servicing
should be performed by an authorized service representative or a professional center.
1
2
3
4
5
6
7
8
9