MPM MMU-02 - Manual (Page 10)

10
GB
● The shaver has been designed for the removal of bristle and knots
from the surface of cloths in order to make it smooth and eliminate its .
flannelling.
● The shaver can be used for all types of fabrics
● The cloths should be uniformly laid on an even horizontal surface.
● Do not press down the shaver in course of shaving – it should be moved
along the cloth extremely gently!
● The appliance should be stored in a dry area.
● The working time of the shaver after its charging amounts about .
0.5 hour. The charging time amounts 8 up to 12 hours. The charging
time should not be longer than 14 hours.
USE OF SHAVER
1..Depress the switch (7) in order to switch on the shaver.
2. The knots removed from the cloth are contained in special container .
for knots (1).
3. Depress the switch (7) again in order to switch off the shaver.
4. Two shaving heights are possible by means of the shave.
CLEANING AND MAINTENANCE
Any special maintenance activities are unnecessary. However the fol-
lowing principles must be complied with in course of use. The cleanness .
of the appliance should be maintained in order to ensure its correct func-
tioning. The appliance should be cleaned with brush (9) occasionally .
6
3
5
7 8
1
MMU-02
9
MMU-01_i_02_instrukcja.indd...10 2009-08-28...14:43:04