MPM MZE-04 User Manual

Page 12

Advertising
background image

12

GB

SAFETY OPERATION INSTRUCTIONS

● Read the manual carefully before use.

● The iron must be plugged to a grounded source of the current.

● Take special precautions if there are children nearby!

● Never put the unit, cable or plug into water or other liquids.

● Never leave the iron plugged into socket without supervision.

● Do not hang the wire on sharp edges and do not let it touch hot surfaces.

● Check regularly if the cable is not damaged.

● Never use the device if the cable, plug or other elements are damaged. In such case have the device

repaired in an authorized service point.

● Always take a plug from a socket when you are not using the device or before starting any

maintenance activities.

● When you pour the water into the water tank or you empty it, unplug the device from the socket.

● Never touch the iron’s soleplate when the iron is on!

● Pour the water into the water tank only. It is recommended to use distilled water in order to avoid

stone plates depositing in internal parts of the iron.

● Do not add any chemical substances to the water poured into the tank – they can damage the iron.

● Do not touch hot parts of the iron, hot water or steam. You can burn yourself.

● Never use the unit for purposes other than indented.

● The unit is designed to work at a household.

● Do not use the unit outdoors.

● Do not open the water tank while ironing.

● Use the iron on a stable surface. Always put the iron on the stable surface.

● Do not use the unit if the iron had been dropped, you can see damages or the water leaks.

● This appliance is not intended for use by persons (including children) with physical, mental or

sensory handicaps, or by those who are inexperienced or unfamiliar with the appliance, unless

under supervision or in accordance with the instructions as communicated to them by persons

responsible for their safety.

● Ensure that children do not play with the appliance.

PRODUCT DESCRIPTION

1. Steam adjustment button 0-20g/min.

2. Water spray button.

3. Steam stroke button to 75g/min.

4. Steam adjustment knob.

5. Swivel, 3-metre-long cord

6. Work status control lamp.

7. Water reservoir with a capacity of 330 ml.

8. Ceramic foot.

9. Spray hole.

10. Water inlet cover.

11. A handle covered with anti-slip layer

12. A „SELF CLEAN” button.

BEFORE YOU USE THE UNIT

FOR THE FIRST TIME

1 Remove all tags, labels, cover plates and the protective

foil from the soleplate.

2 Clean and rinse the fill cup.

10

1

3

2

Advertising