Multichannel Systems USB-ME64-128-256-Systems Manual - Manual (Page 32)

USB-ME-System Manual
28
Interface and connectors
Front panel
1 / 2 / 4 Digital Inputs Lemo connector, EPL.00.250 NTN
1 / 2 / 4 x 64 Analog In 68-pin MCS standard connectors, MCS high grade cable
Rear panel
1 16 Bit Digital In / Out 68-pin MCS standard connectors, MCS high grade cable
1 Digital Out D0 Lemo connector, EPL.00.250 NTN
1 Sync In Lemo connector, EPL.00.250 NTN
1 Sync Out Lemo connector, EPL.00.250 NTN
1 Audio Output Stereo jack 3.5 mm, FFA.00.250 CTAC29
4 Analog Inputs Lemo connector, EPL.00.250 NTN
USB USB 2.0 High Speed cable (type A - mini B, 5 pin)
Power Supply DC PWR 0.7 x 2.35 mm, PWR DC 0.65 x 2.75 mm
Ground Common jack 4 mm, banana plug,
External Power through Lemo EPG.0B.303 HLN
Power supply unit (MPU 30)
Input voltage 90 – 264 VAC @ 47 – 63 Hz
Output voltage 11 – 13 V
Max. Power 30 W
Software
Operating system Microsoft Windows ® 7, XP or Vista with NTFS
English and German version supported
MC_Rack program:
Data acquisition and analysis
software Version 3.6.3 and higher
MC_DataTool program:
Data export software Version 2.4.1 and higher
Axon binary file (*.abf), ASCII file (*.txt),
binary file (*.raw)
LTP-Director:
Data acquisition, stimulation and
analysis software Version 1.2.0