Multichannel Systems ME-System Manual - Manual (Page 7)

Important Information and Instructions
7
Electromagnetic compatibility of the MC_Card
The MC_Card data acquisition board is only intended for research work in laboratories.
It belongs to product class 0 conforming to the European Product Regulations and the
CE (Conformité Européenne) marking. The MC_Card complies with all applicable directives
specified in the Council Directive for Electromagnetic Compatibility (89/336/EU).
Requirements for the installation
 The MC_Card is only suitable for extra-low voltages and shall be used only as specified.
 The equipment shall be correctly earthed or connected to ground.
 The analog inputs should be closed or connected to active signals.
 Connections to all inputs and outputs shall be made with screened cables specified by
Multi Channel Systems. The screen has to be connected to a solid earth or chassis connection.
ESD voltages at open lines may cause malfunction during operation.
 The products shall only be operated from approved power packs (if necessary).