Multichannel Systems PS40W Manual - Manual (Page 5)

2
1.3 Important Safety Advice
Warning: Obey always the rules of local regulations and laws. Only qualified
personnel should be allowed to perform laboratory work. Work according
to good laboratory practice to obtain best results and to minimize risks.
The product has been built to the state of the art and in accordance with recognized
safety engineering rules. The device may only
 be used for its intended purpose;
 be used when in a perfect condition.
 Improper use could lead to serious, even fatal injuries to the user or third parties
and damage to the device itself or other material damage.
Warning: The devices and the software are not intended for medical
uses and must not be used on humans.
Malfunctions which could impair safety should be rectified immediately.
High Voltage
Electrical cords must be properly laid and installed. The length and quality of the cords
must be in accordance with local provisions.
Only qualified technicians may work on the electrical system. It is essential that the
accident prevention regulations and those of the employers' liability associations are
observed.
 Each time before starting up, make sure that the mains supply agrees with the
specifications of the products.
 Check the power cords for damage each time the site is changed. Damaged power
cords should be replaced immediately and may never be reused.
 Check the leads for damage. Damaged leads should be replaced immediately and may
never be reused.
 Do not try to insert anything sharp or metallic into the vents or the case of the products.
 Liquids may cause short circuits or other damage. Keep the devices and the power cords
always dry. Do not handle it with wet hands.