Multichannel Systems MEA2100_PE60-120+HE60-120 - Manual

MEA2100-PE60/120 / MEA2100-HE60/120
Perfusion Element / Heating Element
© 2013 Multi Channel Systems MCS GmbH
IMPORTANT:
Please disconnect the MEA2100 headstage from the MEA2100 interface board
and from the electrical outlet!
Please follow the instructions with great care.
Only experienced persons should change the elements on the ground plate of the MEA2100 headstage.
1. Turn the ground plate of the MEA2100 headstage around and put it onto a soft surface to avoid
scratches. You need a TORX T6 screw driver to remove the designated screws (M2 x 4). Unscrew
the six screws which fix the cover for the tubing. Keep the screws for reusing them later.
Ground plate of the headstage MEA2100-HS60 or MEA2100-HS120 of the MEA2100-System equipped
with a heating element MEA2100-HE60/120 (left) and perfusion element MEA2100-PE60/120 (right).
Instructions for the Replacement of the Perfusion Element and / or Heating Element
of the MEA2100 Headstage MEA2100-HS60 and MEA2100-HS120.