Multichannel Systems MEA2100-System - Manual (Page 2)

Technical Specifications
Page 2 of 2 © 2014 Multi Channel Systems MCS GmbH
Interface board with connectors
Interface board
Dimensions (W x D x H) 250 mm x 83 mm x 25 mm
Weight 300 g
Front panel
4 Digital inputs Lemo connector, EPL.00.250 NTN
4 Digital outputs Lemo connector, EPL.00.250 NTN
2 Auxiliary channels (not in use) Lemo connector, EPL.00.250 NTN
Rear panel
1 16 bit Digital In / Out 68-pin MCS standard connectors
1 8-Channel Analog IN 20-pin connector (2.54 mm grid), dual row standard IDC
2 Analog Inputs Lemo connector, EPL.00.250 NTN
2 USB high speed ports
USB 2.0 high speed cable (type A - mini B, 5 pin)
Power Supply MPU 30, scope of delivery, PWR DC 0.65 x 2.75 mm
Ground Common jack 4 mm, banana plug,
1 Audio Output Stereo jack 3.5 mm, FFA.00.250 CTAC29
Side panel
2 Interface board to headstage External power over serial ATA (eSATAp)
Power supply unit (MPU 30)
Input voltage 90 – 264 VAC @ 47 – 63 Hz
Output voltage 11 – 13 V
Max. Power 30 W
Mark of conformity CE, TÜV, cUL
European standard EN60601
Software
Operating system Microsoft Windows ® 8.1,
Microsoft Windows ® 7 (32 or 64 bit),
XP or Vista
English and German version supported
MC_Rack program
Data acquisition and analysis software Version 4.1.1 and higher
MC_DataTool program
Data export software Version 2.6.3 and higher
Axon binary file (*.abf), ASCII file (*.txt),
binary file (*.raw)
Warning: The device may only be used together with MEA chips from Multi Channel
Systems MCS GmbH, and only for the specified purpose. Damage of the device and
even fatal injuries can result from improper use. Do not open the headstage or the
interface box and do not change hardware configuration as it could lead to
improper behaviour of the system.