Multichannel Systems Wireless-C-HC Charging Device User Manual

Multi channel systems, Wireless-c-hc charging device

Advertising
background image

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany

Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11

[email protected]
www.multichannelsystems.com

© 2014 Multi Channel Systems MCS GmbH

Product information is subject to change
without notice.

Wireless-C-HC Charging Device

Charging Device for the Storage Battery with High Capacity
for the Headstage of the Wireless-System

multi

channel

systems

*

The charging device for the storage battery of the Wireless-System headstage is USB powered.

To recharge the battery, please connect the charging set to an USB port of the computer and plug the battery
into the connector of the charger.

The red LED on top indicates that the device is on. The yellow LED indicates that the storage battery is being
recharged. After approximately one hour the green LED indicates the end of the recharging process.

Dimension of charging device: 58 x 20 x 10 mm
Weight of the charging device: 7 g

Important:
Storage batteries are available with different capacities 100 mAh, 200 mAh, 300 mAh and 30 mAh.
They have to be recharged with the correct charger. Please use for the 30 mAh battery the low capacity
charging device Wireless-C-LC, which is specially adapted for!
Do not use the high capacity charging device Wireless-C-HC for the storage batteries with low capacity
(30 mAh), otherwise the charger and the computer might be disturbed!

Scope of delivery: 1 Wireless-C-HC charger

Two types of battery charger are available, one for storage batteries with high capacity
Wireless-C-HC (100, 200, 300 mAh) and one for storage batteries with low capacity
Wireless-C-LC (30 mAh). Do not mistake the charging devices!

Lithium Polymere storage battery
plugged into the connector
of the charging set.

Battery charger

Advertising