Multichannel Systems Standard 60MEA - Manual

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2014 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Standard 60MEA
60MEA200/10iR-ITO, 60MEA200/30iR-ITO,
60MEA100/10iR-ITO, 60MEA100/10-ITO,
60MEA100/10iR-Ti, 60MEA200/30-Ti,
60MEA200/10iR-Ti, 60MEA200/30iR-Ti
Technical Specifications Standard 60MEA
Temperature compatibility 0 - 125 °C
Dimension (W x D x H) 49 mm x 49 mm x 1 mm
Base material Glass
Track material ITO (Indium tin oxide) or Ti (Titanium)
Contact pads ITO (Indium tin oxide) or TiN (Titanium nitride)
Electrode diameter 10 or 30 μm
Interelectrode distance (centre to centre) 100 or 200 μm
Electrode height Planar
Electrode type TiN (Titanium nitride)
Isolation type Silicon nitride 500 nm (PEVCD)
Electrode impedance 30 - 50 k for 30 μm electrodes, 250 - 400 k for 10 μm electrodes
Electrode layout grid 8 x 8
Number of recording electrodes 59 (with iR) or 60 (without iR)
Number of reference electrodes 1 internal reference electrode (iR) or without internal reference
MC_Rack
Source layout in “Data Source Setup”
2 dim. (MEA) or Configuration
Channel map Default
MEA perfusion chamber (w/o) Without ring
(gr) Glass ring: ID +/- 19 mm, OD 24 mm, height 6 / 12 mm
(pr) Plastic ring without thread: ID 26.5 mm, OD 30 mm, height 6 / 3 mm
(pr-T) Plastic ring with thread: ID 26 mm, OD 30 mm, height 6 / 15 mm
21 31 41 51 61 71
12
13
14
15
16
17
22
23
24
25
26
27
28
32
33
34
35
36
37
38
42
43
44
45
46
47
48
52
53
54
55
56
57
58
62
63
64
65
66
67
68
72
73
74
75
76
77
78
82
83
84
85
86
87
49.0 mm
5.4 mm
200 / 100 μm
10 / 30 μm 2.2 mm
0.2 mm
Contact pads
Standard electrode layout grid 8 x 8
49.0 mm REF