Multichannel Systems PG-MEA1060-INV - Manual

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 201 2 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Plexiglass of MEA1060-INV-PGP
PG-MEA1060-INV
Plexiglass of Perfusion Ground Plate for MEA1060-INV Amplifier
Instructions for Changing the Plexiglass Part of the Perfusion Ground Plate
of the MEA1060-INV Amplifier
PGP-O-Ring
O-Ring-PGP
Scope of delivery:
1 Plexiglass Part PG-MEA1060-INV
14 Screws (M3x5)
Disconnect the eight screws fixing the plexiglass with an Allen key 2.0. Disconnect the six screws
fixing the steel perfusion IN and perfusion OUT. Detach the broken plexiglass and replace the
new plexiglass. Press the steel tubes carefully into the provided slot. Tighten the screws very
softly first and screw them not too hard.
Perfusion Ground Plate in original state.